DYNOmite Motorcycle & ATV Dynamometer Specifications 

DYNOmite Data Acquisition Computer:

Expandable, surface mount, board system runs on 120-volt 60-Hz AC, 240-volt 50-Hz AC, or 12-volt DC
“Pro” PC based 28, 56 or 112+ channel capable board sets, require DYNO-MAX software
“Lite” 3-channel (upgradeable to “Pro” above)
Up to 1,000 recordings per second (per channel)
Quick disconnect data harness
Non-volatile set-up memory
“Smart Record” automated recorder triggering
RS-232 or USB output to a PC or laptop with DYNO-MAX 2000 software option 

Torque Transducer:

1% of full scale typical accuracy
Environmentally sealed strain gauge
Semi-automatic zero offset calibration
Temperature compensated

Hp Capacity** (traction limited):

**Approximate; limited primarily by tire safety and traction - higher torque transfer requires tie towns. Continuous capacities depend on selected absorber and test speed.
5 to 500+ inertial Hp (5 to 200+ continuous Hp with 9" water brake absorber)

MPH Range (tire limited):

10 - 200 MPH

Engine Tachometer:

0 - 32,000+ RPM display
Quartz crystal calibrated
RPM pulse type is selectable from ½ to 12 pulses per revolution
“Clamp-on” inductive pick-up (standard)

Dyno Speedometer:

0.0 - 255.0 MPH display
Quartz crystal calibrated
Magnetic RPM/MPH pick-up (standard)

Load Control (absorption units only):

Electronic Auto-Load (with road simulation)

Absorber (except inertia only models):

Standard - 9" toroidal flow water brake absorber
Optional - fast response eddy current absorber
CNC machined from aircraft aluminum
Dual heavy-duty sealed bearings
Stainless steel, heat treated arbor shaft
Adjustable load characteristics
External Zerk grease fittings
Optional “Auto-Lube” kit

Roller Frame:

Heavy-duty structural, tubular, and custom rolled, steel frame with diamond plate deck
Adjustable (to 84" extended) front tire stop
Electric actuator and auto-clamping (optional)
Removable roll-up ramp(s)
Leveling vibration pads
Mobile - with integral casters on ATV models
Greaseable bearings

Roller:

16" diameter - maintains low profile deck height without damaging tires
Motorcycle/ATV models - 50"W wide roll
Inertia only motorcycle models - 25" width
Formula SAE models - 64" extra wide roll
Machined in “Traction Grooves” for maximum grip and tire life under high power testing
Medium inertia (to allow absorber simulations)

Control Console and PC Options:

Swinging boom with mini-console (less laptop)
Enclosed (RFI resistant) rolling PC cabinet

Approximate Dimensions and Weight:

Bike/ATV - 58"W x 92"L x 16"H (less ramps)
Bike only - 35"W x 92"L x 16"H (less ramp)
weight - 1,300 pounds (inertia only)
weight - 1,400 pounds (with water brake)
weight - 1,600 pounds (with eddy current)

Optional Portable Color Inkjet Printer:

Rechargeable NiCad battery powered
120-volt AC charger adapter included
Windows compatible drivers
USB and parallel port interface
Prints DYNO-MAX graphs in full color

Data Collection Options:

5-gas analyzer with RS-232 interface
Air/fuel ratio exhaust gas module (with pump)
Air/fuel ratio (calculated)
Airflow turbines 3", 4", and 6"
Air temperature, humidity, and barometric pressure “Weather Station”
Brake specific air consumption (calculated)
Brake specific fuel consumption (calculated)
DYNO-MAX 2000 “Pro” software
Engine temperature thermistors
Exhaust gas temperature thermocouple kits
Fuel flow turbine kits
Fuel/manifold pressure transducers
Oil pressure transducers
Sparkplug temperature thermocouples

Other Options:

42" 16,200 CFM test bay cooling fan
Calibration weight kits
Electric actuator front wheelbase adjuster
High velocity engine cooling blower
Portable color inkjet printer
Portable gasoline powered water pumps
Rear wheel self-starter (12-volt)
Sling psychrometer
Trailer for Motorcycle/ATV Dyno

*Las capacidades del absorbedor dependen de las rpm. Los frenos hidráulicos requieren un mínimo de caudal de agua de 1 gpm en 30+ psi por cada 20 Hp continuos. Llame a Land & Sea, Inc al +1-603-226-3966 para conocer los límites de potencia aproximados de configuraciones específicas.